Jackson Indoor Furnishings Scaltrol User Manual

Scaltrol Option  
Installation Sheet  
1 . 8 8 8 . 8 0 0 . 5 6 7 2  
w w w . j a c k s o n m s c . c o m  
Out to dishmachine  
Item Description  
Qty  
Part Number  
Scaltrol mounting  
bracket  
1
2
3
4
5
Scaltrol Unit  
1
1
3
1
1
4730-003-05-76  
Buy Locally  
Buy Locally  
4730-212-05-00  
Buy Locally  
3/4” NPT Ball Valve  
3/4” NPT Close Nipple  
3/4” NPT Union  
3/4” NPT Check Valve  
2
5
4
Note: The Scaltrol (item 1) ships with the check valve (item 5). All of the  
others items shown are for a suggested installation. Installations must com-  
ply with all applicable regulatory, health and building codes. It is the respon-  
sibility of the installer to ensure that requirements are met. It is also the  
responsibility of the installer to ensure that plumbing is properly supported.  
3
Unit Mounting Instructions:  
1. The Scaltrol is to be securely mounted to a wall or piece of equipment  
using the attached mounting bracket. It must be installed so that the car-  
tidge is pointing towards the floor. The Scaltrol unit will not operate correctly  
otherwise. Ensure that whatever the unit is mounted to is able to support the  
weight of the Scaltrol.  
From system potable  
water supply.  
2. The unit should be mounted with a shut-off valve (as shown with item 2).  
This will allow for easy cartidge replacement.  
3. The check valve should be mounted with the direction arrow pointing  
away from the Scaltrol.  
1
4. Connect to dishmachine’s incoming plumbing.  
WARNING  
The Scaltrol should never be installed in direct sunlight or in an area exposed to excessively cold/freezing temperatures!  
Cartridge Replacement Instructions:  
Replace when the level in the cartridge reaches the bottom red end cap. Use the attached wrench to unscrew the cartridge chamber and remove the  
cartridge. Once replaced with a new one (contact your chemical specialist regarding replacement parts), screw the cartridge chamber back on and  
tighten by hand. DO NOT USE THE SUPPLIED WRENCH TO TIGHTEN THE CARTRIDGE CHAMBER!  
You may order a replacement cartridge using part number RSC-100. This entire kit (ScalTrol unit, check valve and this instruction sheet) can be  
ordered using part number 6401-003-05-80.  
Specifications:  
1. Check valve - 3/4” NPT, brass construction with 3 lbs cracking pressure.  
2. Scaltrol, 3/4” NPT inlet and outlet, plastic body with replaceable cartridge.  
Specifications subject to change without notice  
07610-002-18-72B (06/05)  
 
Jackson MSC Inc., P.O. Box 1060, Barbourville, KY. 40906 (606)523-9795  

Insignia Mouse NS PNC5011 User Manual
Insignia MP3 Docking Station NS B2113 User Manual
Insignia Stereo Receiver NS R5100 User Manual
Integra Car Video System DSR 73 User Manual
Jet Tools Microwave Oven JT 359 User Manual
JVC TV DVD Combo AV 20FD24 User Manual
KEF Audio Speaker 290149ML User Manual
Kenmore Water Heater 152329361 User Manual
Kenwood Car Stereo System KDC 2021S User Manual
KitchenAid Blender 5KHB100 User Manual